Cleaners & Degreasers • SPECIALTY FLUIDS 681 WHAMEX XT ™ Low Foam Machine Tool Sump & System Cleaner Whamex XT ™ is low foam, safe, fast-acting formula that will save machine cleaning downtime while removing the residues and deposits that reduce coolant life. Made for cleaning out machine tool sumps, coolant supply lines and coolant recycling equipment, Whamex XT ™ is compatible with most waste treatment (including ultrafiltration). Whamex XT ™ will not degrade TRIM ® metalworking fluids when used as directed. FEATURES: • A very specialized formula that quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to Problem: Foamy cleaners collect residue and react poorly with additives to cause degraded fluids and shorter performance life. Solution: A low-foaming formula that doesn't react to waste treatment chemicals improves fluid life and performance. extend coolant life in your system. • Very hard water tolerant allowing it to be effective in raw water or used coolant. • Environmental approvals are simplified because Whamex XT ™ contains no nitrites, phosphates, barium, phenols or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients. • When used as directed, this product is compatible with TRIM ® brand synthetic, semi-synthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses or skirting, and it won't leave a slippery residue. • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways. SIZE WEIGHT MODEL # 5 Gallon 54 Gallon 48.2 lbs. 510 lbs. WHAMEXXT/5 WHAMEXXT/54 † Ships direct from factory. Truck ship only. ORDER # 81-006-174 81-006-175† PRICE EACH $282.76 2,734.04 5 GALLON MODEL #WHAMEXXT/5 PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: • Add 1%-3% Whamex XT ™ into the machine sump and run machine as normal for at least 24 hours or more for best results. If the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES ™ DF1 or TRIM ® TC 239, available during this process. • A fter the Whamex XT ™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes. • Spray down the machine with a 10%-15% Whamex XT ™ and water solution using The Whammer ™ or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters. • W hen possible, pull out the sump and remove the conveyor, and clean all surfaces of the sump and conveyor including screens, covers and the pumps themselves with the 10%-15% Whamex XT ™ solution. When complete remove all fluid, chips swarf, grime and sludge. • Fill the sump with enough water to circulate the pumps and mix in 3%-5% Whamex XT ™ . Circulate this cleaning solution through the coolant system for 30-60 minutes. • R eplace conveyor and sump; rinse the machine with water and 1.0% TRIM ® coolant for rust protection, and circulate mixture through the coolant system for 10-30 minutes. • Pump out the rinse water as dry as possible and recharge with fresh TRIM ® coolant at the designated concentration. • After circulating for 30 minutes check the concentration and make the necessary adjustments to insure the TRIM ® coolant is within the designated concentration range. QUICK CLEANING METHOD (FOR NONCRITICAL INTERIM CLEANING): • Add 1%-3% Whamex XT ™ and circulate for 24 hours or more for best results. If the machine runs high-pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as DF1 or TC 239, available during this process. • Utilizing The Whammer ™ , scrub down the machine including the inside, tool changer, exterior and crevices. • Remove fluid sump and chip conveyor when possible and clean out all chips and swarf (don't forget pumps, covers, high-pressure tanks and filter canisters). • Replace conveyor and sump and rinse with 1% TRIM ® coolant for 10-30 minutes. • R emove 1% rinse fluid and recharge at specified concentration. • C heck concentration with refractometer. CLEANER/DEGREASERS BENEFITS: FEATURES: Non-toxic, biodegradable and non-flammable • This versatile concentrate can be custom • Non-abrasive, concentrated diluted and lasts far longer than other and water-activated. ready-to-use brands. • Sassafras scent. APPLICATIONS: • Removes oil, grease & dirt residue from any washable surface. SIZE WEIGHT MO#DEL OR#DER PERACICHE CQATSYE. 24 oz. 2 lbs. 13012 81-001-610 $15.49 12 1 Gallon 9 lbs. 13005 81-001-612 34.52 6 5 Gallon 46 lbs. 13006 81-001-614 99.36 — 55 Gallon 494 lbs. 13008 81-001-615† 1,026.99 — † Ships direct from factory. Truck ship only. PRICE EACH $13.94 31.07 — — 24 OZ. MODEL #13012 CRYSTAL-INDUSTRIAL STRENGTH DEGREASERS 1 GALLON MODEL #13005 5 GALLON MODEL #13006 APPLICATIONS: • Excellent in parts washers. • Versatile concentrate with no added color or fragrance for superior rinsability. FEATURES: • Non-toxic. • Biodegradable. • Zero VOC's. • Industrial strength. • Concentrated. • USDA authorized. ♦ Do Not Use In Solvents Parts Washers. SIZE WEIGHT MO#DEL OR#DER PERACICHE CQATSYE. 24 oz. 1 Gallon 5 Gallon 55 Gallon 2 lbs. 9 lbs. 46 lbs. 494 lbs. 19024 81-001-618 $22.11 12 19128 81-001-620 47.30 6 19005 81-001-622 185.79 — 19055 81-001-626† 1,038.54 — † Ships direct from factory. Truck ship only. PRICE EACH $19.90 42.57 — — 24 OZ. MODEL #19024 1 GALLON MODEL #19128 5 GALLON MODEL #19005 Order By Phone: 1.800.221.0270 • Order By Fax: 1.800.722.0703 • Shop Our Extensive Selection & Order Online: Travers.com